John Aarts

Contact Details

Phone: +64 3 479 7060
Email: john.aarts@otago.ac.nz

University Links

Position

Senior Lecturer and Dental Technology Programme Convenor

Department

Department of Oral Rehabilitation

Qualifications

MHealSc PGDipCDentTech BEd DipDentTech

Research summary

Dental technology; dental and clinical themes

Memberships

Committee Member Dental Council (New Zealand)
Professional expert for Tertiary Education Quality and Standards Agency Australia
Committee Member Dental Technology Admissions Panel Department of Oral Rehabilitation

Research

My main research thread is related to dental implants and associated removable dentures. My research interests also extend into dental materials and particularly those to do with removable appliances.

The skills and knowledge I have in this area includes stress analysis using both physical and finite elemental analysis methods. I also have an interest in qualitative research that looks at clinical issues and the dental technology profession. This area of research stems from my degree in education where I developed skills in applied qualitative research.

Publications

Kagaoan, Z., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2024). Factors influencing the bond strength of additively manufactured crown materials in dentistry: A systematic review of in vitro studies. Journal of Dentistry, 104908. Advance online publication. doi: 10.1016/j.jdent.2024.104908 Journal - Research Other

Kagaoan, Z., Liu, X., Cameron, A., Aarts, J., & Choi, J. (2024). Prolonged post-washing in ethanol decreases bond strength of additively manufactured crown materials. Journal of Dentistry. Advance online publication. doi: 10.1016/j.jdent.2024.104873 Journal - Research Article

Cao, J., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2024). Influence of different post-processing methods on the dimensional accuracy of 3D-printed photopolymers for dental crown applications: A systematic review. Journal of the Mechanical Behavior of Biomedical Materials, 150, 106314. doi: 10.1016/j.jmbbm.2023.106314 Journal - Research Other

Grymak, A., Choi, J., Aarts, J., & Cameron, A. (2023). Prediction of wear resistance in 3D-printed permanent crown materials. Proceedings of the Graduate Research Student Symposium. (pp. 13-14). Retrieved from https://www.otago.ac.nz/graduate-research Conference Contribution - Published proceedings: Abstract

Kagaoan, Z., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2023). Prolonged cleaning in ethanol decreases bond strength of 3D-printed crowns. In T. Milne, M. Anwar, L. Burga, H. Harcombe, M. Garelja, A. Middleton, D. C. Ribeiro, N. Fleming, K. Ogbuehi & A. Bahn (Eds.), Proceedings of the 268th Otago Medical School Research Society (OMSRS) Meeting: Masters/Honours/Postgraduate Diploma Student Speaker Awards. Dunedin, New Zealand: OMSRS. Retrieved from https://ourarchive.otago.ac.nz/handle/10523/12839 Conference Contribution - Published proceedings: Abstract

2024

Journal - Research Article

Journal - Research Other

2023

Journal - Research Article

Bennani, V., Aarts, J. M., & Senthilkumar, A. (2023). Effect of a modified laminate veneer preparation design on absolute margin discrepancy and marginal overhang. Journal of Prosthetic Dentistry. Advance online publication. doi: 10.1016/j.prosdent.2023.10.033

Liu, X., Aarts, J. M., Ma, S., & Choi, J. J. E. (2023). The impact of different polishing systems on yttria-stabilized tetragonal zirconia polycrystalline crowns in relation to heat generation. Clinical & Experimental Dental Research. Advance online publication. doi: 10.1002/cre2.778

Zheng, J., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2023). Different undercut depths influence on fatigue behavior and retentive force of removable partial denture clasp materials: A systematic review. Journal of Prosthodontics, 32, 108-115. doi: 10.1111/jopr.13519

Journal - Research Other

Lin, J., Bennani, V., Aarts, J. M., Brunton, P., & Ratnayake, J. (2023). Factors influencing success rate of ceramic veneers on endodontically treated anterior teeth: A systematic review. Journal of Prosthetic Dentistry. Advance online publication. doi: 10.1016/j.prosdent.2023.10.031

Talesara, V., Bennani, V., Aarts, J., Ratnayake, J., Khurshid, Z., & Brunton, P. (2023). Accuracy of digitally coded healing abutments: A systematic review. Saudi Dental Journal. Advance online publication. doi: 10.1016/j.sdentj.2023.08.006

Khaw, S., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2023). Factors influencing the dimensional accuracy of additively manufactured dental models: A systematic review of in vitro studies. Journal of the Mechanical Behavior of Biomedical Materials, 146, 10657. doi: 10.1016/j.jmbbm.2023.106057

Liu, X., Aarts, J. M., Ma, S., & Choi, J. J. E. (2023). The influence of polishing on the mechanical properties of zirconia: A systematic review. Oral, 3, 101-122. doi: 10.3390/oral3010010

Conference Contribution - Published proceedings: Abstract

2022

Journal - Research Article

Zheng, J., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2022). Fatigue behavior of removable partial denture cast and laser-sintered cobalt-chromium (CoCr) and polyetheretherketone (PEEK) clasp materials. Clinical & Experimental Dental Research, 8, 1496-1504. doi: 10.1002/cre2.645

Grymak, A., Waddell, J. N., Aarts, J. M., Ma, S., & Choi, J. J. E. (2022). Evaluation of wear behaviour of various occlusal splint materials and manufacturing processes. Journal of the Mechanical Behavior of Biomedical Materials, 126, 105053. doi: 10.1016/j.jmbbm.2021.105053

Journal - Research Other

Mudliar, V. L., Tieh, M. T., Aarts, J. M., Paras, A., & Choi, J. J. E. (2022). Wear of modern denture teeth: A systematic review. Oral, 2, 95-111. doi: 10.3390/oral2010011

Grymak, A., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2022). Wear behavior of occlusal splint materials manufactured by various methods: A systematic review. Journal of Prosthodontics, 31, 472-487. doi: 10.1111/jopr.13432

2021

Journal - Research Article

Ganjigatti, R. R., Bennani, V., Aarts, J. M., Choi, J. J. E., & Brunton, P. A. (2021). Efficacy and safety of Botulinum toxinA for improving esthetics in facial complex: A systematic review. Brazilian Dental Journal, 32(4), 31-44. doi: 10.1590/0103-6440202104127

Grymak, A., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2021). Comparison of hardness and polishability of various occlusal splint materials. Journal of the Mechanical Behavior of Biomedical Materials, 115, 104270. doi: 10.1016/j.jmbbm.2020.104270

Chai, S. Y., Bennani, V., Aarts, J. M., Lyons, K., & Das, R. (2021). Stress distribution within the ceramic veneer-tooth system with butt joint and feathered edge incisal preparation designs. Journal of Esthetic & Restorative Dentistry, 33, 496-502. doi: 10.1111/jerd.12655

Aarts, J. M., Choi, J. J. E., Metcalfe, S., & Bennani, V. (2021). Influence of build angulation on the mechanical properties of a direct-metal laser-sintered cobalt-chromium used for removable partial denture frameworks. Journal of Prosthetic Dentistry, 126, 224-230. doi: 10.1016/j.prosdent.2020.06.014

Journal - Research Other

Bennani, V., Chuang, Y.-S., Aarts, J. M., & Brunton, P. (2021). Evaluation of effectiveness and adverse effects of retraction cord vs retraction paste: A systematic review. International Journal of Prosthodontics & Restorative Dentistry, 11(4), 183-190. doi: 10.5005/jp-journals-10019-1344

Conference Contribution - Verbal presentation and other Conference outputs

Aarts, J. (2021, August). The new recertification process: What you need to know. Verbal presentation at the New Zealand Institute of Dental Technologists (NZIDT) Conference, Wellington, New Zealand.

2020

Journal - Research Article

Jansen van Vuuren, W., Jansen van Vuuren, L., Aarts, J., Hanlin, S., & Waddell, J. N. (2020). Mechanical properties of denture base resin materials: CAD/CAM versus traditional heat-cure. New Zealand Dental Journal, 116(3), 81-89.

Ramani, R. S., Bennani, V., Aarts, J. M., Choi, J. J. E., & Brunton, P. A. (2020). Patient satisfaction with esthetics, phonetics, and function following implant-supported fixed restorative treatment in the esthetic zone: A systematic review. Journal of Esthetic & Restorative Dentistry, 32, 662-672. doi: 10.1111/jerd.12625

Bennani, V., Aarts, J. M., & Brunton, P. (2020). A randomized controlled clinical trial comparing the use of displacement cords and aluminum chloride paste. Journal of Esthetic & Restorative Dentistry, 32(4), 410-415. doi: 10.1111/jerd.12581

Chai, S. Y., Bennani, V., Aarts, J. M., Lyons, K., & Lowe, B. (2020). Effect of incisal preparation design on load-to-failure of ceramic veneers. Journal of Esthetic & Restorative Dentistry, 32, 424-432. doi: 10.1111/jerd.12584

Journal - Research Other

Naidu, A. S., Bennani, V., Aarts, J. M., & Brunton, P. (2020). Over-the-counter tooth whitening agents: A review of literature. Brazilian Dental Journal, 31(3), 221-235. doi: 10.1590/0103-6440202003227

2019

Journal - Research Article

Chew, D., Bennani, V., Aarts, J. M., Chandler, N., Gray, A., & Lowe, B. (2019). Bonding strengths to porcelain: An in vitro study of ultrasonic and conventional tooth preparation and etching. Journal of Conservative Dentistry, 22(1), 76-81. doi: 10.4103/JCD.JCD_302_18

Conference Contribution - Published proceedings: Abstract

Bennani, V., Aarts, J. M., & Brunton, P. A. (2019). Gingival displacement, retraction cord versus retraction paste: A clinical study. New Zealand Dental Journal, 115, (pp. 160-161). [Abstract]

2018

Journal - Research Article

Chu, J., Bennani, V., Aarts, J. M., Chandler, N., & Lowe, B. (2018). The effect of different geometric shapes and angles on the fracture strength of IPS e.max computer‑aided designed ceramic onlays: An in vitro study. Journal of Conservative Dentistry, 21(2), 210-215. doi: 10.4103/JCD.JCD_242_17

Chai, S. Y., Bennani, V., Aarts, J. M., & Lyons, K. (2018). Incisal preparation design for ceramic veneers: A critical review. Journal of the American Dental Association, 149(1), 25-37. doi: 10.1016/j.adaj.2017.08.031

2017

Journal - Research Article

Aarts, J. M., Jansen van Vuuren, W.-A., Withy, K. E., Choi, J. E., & Waddell, N. J. (2017). A pilot study on the influence of two reinforcing materials (glass fibre mesh and electro-spun nylon nano fibres) on the flexural strength of a heat-cured poly (methyl methacrylate) denture base resin. New Zealand Dental Journal, 113(3), 11-15.

Conference Contribution - Published proceedings: Abstract

Chai, S. Y., Bennani, V., Aarts, J., Lyons, K., Lowe, B., Das, R., & Gray, A. (2017). Effect of incisal preparation design on porcelain laminate veneers. New Zealand Dental Journal, 113(4), (pp. 55). [Abstract]

2016

Journal - Research Article

Bennani, V., Aarts, J. M., & Schumayer, D. (2016). Correlation of pressure and displacement during gingival displacement: An in vitro study. Journal of Prosthetic Dentistry, 115(3), 296-300. doi: 10.1016/j.prosdent.2015.08.008

Conference Contribution - Published proceedings: Abstract

Chew, D. W. S., Bennani, V., Chandler, N., Lowe, B., Gray, A., & Aarts, J. (2016). Effects of ultrasonic instruments on enamel and dentine surface bonding. Journal of Dental Research, 95(Spec Iss B), 0665. Retrieved from http://www.iadr.org/

2015

Journal - Professional & Other Non-Research Articles

Aarts, J. (2015). [Review of the book Prosthetic rehabilitation part II: Technical procedures]. New Zealand Dental Journal, 111(1), 42. [Book Review].

Conference Contribution - Published proceedings: Abstract

Bennani, V., Aarts, J. M., & Schumayer, D. (2015). Correlation of pressure and displacement during gingival retraction: An in vitro study. Journal of Dental Research, 94(Spec Iss B), 2281178. Retrieved from http://www.iadr.org/

2014

Journal - Research Article

Shahmiri, R., Das, R., Aarts, J. M., & Bennani, V. (2014). Finite element analysis of an implant-assisted removable partial denture during bilateral loading: Occlusal rests position. Journal of Prosthetic Dentistry, 112(5), 1126-1133. doi: 10.1016/j.prosdent.2014.04.023

Alameri, S. S., Aarts, J. M., Smith, M., & Waddell, J. N. (2014). Dental technology services and industry trends in New Zealand from 2010 to 2012. New Zealand Dental Journal, 110(2), 65-73.

Bennani, V., Inger, M., & Aarts, J. M. (2014). Comparison of pressure generated by cordless gingival displacement materials. Journal of Prosthetic Dentistry, 112(2), 163-167. doi: 10.1016/j.prosdent.2013.09.035

2013

Journal - Research Article

Shahmiri, R., Aarts, J. M., Bennani, V., Das, R., & Swain, M. V. (2013). Strain distribution in a Kennedy class I implant assisted removable partial denture under various loading conditions. International Journal of Dentistry, 2013, 351279. doi: 10.1155/2013/351279

Shahmiri, R., Aarts, J. M., Bennani, V., Atieh, M. A., & Swain, M. V. (2013). Finite element analysis of an implant-assisted removable partial denture. Journal of Prosthodontics, 22(7), 550-555. doi: 10.1111/jopr.12031

2012

Journal - Research Article

Anderson, V. R., Pang, L. C., & Aarts, J. M. (2012). New Zealand dental technicians and continuing education: Findings from a qualitative survey. New Zealand Dental Journal, 108(2), 47-54.

Bennani, V., Aarts, J. M., & Hong He, L. (2012). A comparison of pressure generated by cordless gingival displacement techniques. Journal of Prosthetic Dentistry, 107(6), 388-392. doi: 10.1016/S0022-3913(12)60097-3

Conference Contribution - Published proceedings: Abstract

Bennani, V., Aarts, J., & He, L. H. (2012). A comparison of pressure generated by cord and cordless displacement techniques. Journal of Clinical Periodontology, 39(Suppl. s13), (pp. 198). doi: 10.1111/j.1600-051x-2012.01891.x

2010

Journal - Research Article

Waddell, J. N., Girvan, L., Aarts, J. M., Wu, W., & Swain, M. V. (2010). Elemental composition of imported porcelain-fused-to-metal crowns: A pilot study. New Zealand Dental Journal, 106(2), 50-54.

Conference Contribution - Published proceedings: Abstract

Shahmiri, R., Aarts, J., Bennani, V., & Swain, M. (2010). Mandibular Kennedy class I implant-assisted RPD: Different loading condition. Journal of Dental Research, 89(Spec Iss B), 4218. Retrieved from http://www.dentalresearch.org

2008

Journal - Research Article

Aarts, J. M., Payne, A. G. T., & Thomson, W. M. (2008). Patients' evaluation of two occlusal schemes for implant overdentures. Clinical Implant Dentistry & Related Research, 10(3), 140-156. doi: 10.1111/j.1708-8208.2007.00070.x

Conference Contribution - Poster Presentation (not in published proceedings)

Tiong, R., Adams, C., Haw, S., Wu, W., Ou Yang, Y. F., Lee, R., Kuo, J., Swain, M., Waddell, J. N., Aarts, J. M., & Bennani, V. (2008, October). Failure mechanisms of porcelain fused to metal (PFM) crowns. Poster session presented at the New Zealand Institute of Dental Technologists Annual Conference, Christchurch, New Zealand.

Conference Contribution - Verbal presentation and other Conference outputs

Tiong, R., Adams, C., Haw, S., Wu, W., Ou Yang, Y. F., Lee, R., Kuo, J., Swain, M., Waddell, J. N., Aarts, J. M., & Bennani, V. (2008, October). Understanding the way PFM crowns crack [NZIDT top student research presentation award]. Verbal presentation at the New Zealand Institute of Dental Technologists Annual Conference, Christchurch, New Zealand.

2007

Conference Contribution - Poster Presentation (not in published proceedings)

Chiang, C., Aarts, J., Swain, M. V., Bennani, V., & Polyzois, G. (2007, October). Hardness and elastic modulus of two denture softliners. Poster session presented at the New Zealand Institute of Dental Technologists Annual Conference, Auckland, New Zealand.

2006

Conference Contribution - Published proceedings: Abstract

Aarts, J. M., Currey, T., & Swain, M. V. (2006). Fracture toughness of two denture teeth with two acrylic resins. Journal of Dental Research, 85(Spec Iss B), 2138. Retrieved from http://www.dentalresearch.org

2002

Journal - Professional & Other Non-Research Articles

Aarts, J. M. (2002). Articulation and occlusion: In theory and in practice. Dental Technologies, (33), 33-39.