Wendy Jansen van Vuuren

2023

Journal - Research Article

Reyes, K., Plaksina, P., Barazanchi, A., Jansen van Vuuren, W.-A., Waddell, J. N., & Li, K. C. (2023). Microleakage of chairside moulded, 3D-printed and milled provisional restorations using a curve-fit approach. Brazilian Dental Journal, 34(6), 91-99. doi: 10.1590/0103-6440202305644

Jansen van Vuuren, L., Jansen van Vuuren, W. A., Broadbent, J. M., Duncan, W. J., & Waddell, J. N. (2023). Measurement of tooth displacement. Journal of the Mechanical Behavior of Biomedical Materials, 146, 106059. doi: 10.1016/j.jmbbm.2023.106059

Conference Contribution - Verbal presentation and other Conference outputs

Jansen van Vuuren, L., Broadbent, J. M., Duncan, W. J., Jansen van Vuuren, W. A., & Waddell, J. N. (2023, July). Dental occlusal stress. Verbal presentation at the Faculty of Dentistry Clinical and Research Excellence Symposium, Dunedin, New Zealand.

2020

Journal - Research Article

Jansen van Vuuren, W., Jansen van Vuuren, L., Aarts, J., Hanlin, S., & Waddell, J. N. (2020). Mechanical properties of denture base resin materials: CAD/CAM versus traditional heat-cure. New Zealand Dental Journal, 116(3), 81-89.

Jansen van Vuuren, L., Jansen van Vuuren, W. A., Broadbent, J. M., Duncan, W. J., & Waddell, J. N. (2020). Development of a bite force transducer for measuring maximum voluntary bite forces between individual opposing tooth surfaces. Journal of the Mechanical Behavior of Biomedical Materials, 109, 103846. doi: 10.1016/j.jmbbm.2020.103846

2019

Journal - Research Article

Jansen van Vuuren, W.-A., Al-Amleh, B., Alkharusi, A., Dohan, Z., & Waddell, J. N. (2019). Surface Crack in Flexure versus the Vickers indentation method for calculating fracture toughness in two veneering procelains. New Zealand Dental Journal, 115(4), 151-156.

Gowans, L. J. J., Cameron-Christie, S., Slayton, R. L., Busch, T., Romero-Bustillos, M., Eliason, S., … Drummond, B. K., Markie, D. M., Jansen van Vuuren, W., Jansen van Vuuren, L., … van Staden, I., … Robertson, S. P., & Butali, A. (2019). Missense pathogenic variants in KIF4A affect dental morphogenesis resulting in X-linked taurodontism, microdontia and dens-invaginatus. Frontiers in Genetics, 10, 800. doi: 10.3389/fgene.2019.00800

2018

Journal - Research Article

Jansen van Vuuren, W.-A., Khoo, C. S. T., Ng, B. S. K., Waddell, J. N., & Al-Amleh, B. (2018). The effect of condensing on mechanical properties of feldspathic veneering porcelain. New Zealand Dental Journal, 114(1), 13-18.

Jansen van Vuuren, W.-A., Wong, P., Al-Amleh, B., Lyons, K. M., Li, K. C., & Waddell, J. N. (2018). Effect of a glaze layer on adhesion energy between resin cements to zirconia ceramic. International Journal of Adhesion & Adhesives, 84, 451-456. doi: 10.1016/j.ijadhadh.2018.03.003

2017

Journal - Research Article

Jansen van Vuuren, W.-A., Milmine, H., Al-Amleh, B., Lyons, K. M., & Waddell, N. J. (2017). Effect of multiple firings on the physical properties of a CAD/CAM produced lithium disilicate restorative material. New Zealand Dental Journal, 113(4), 31-38.

Aarts, J. M., Jansen van Vuuren, W.-A., Withy, K. E., Choi, J. E., & Waddell, N. J. (2017). A pilot study on the influence of two reinforcing materials (glass fibre mesh and electro-spun nylon nano fibres) on the flexural strength of a heat-cured poly (methyl methacrylate) denture base resin. New Zealand Dental Journal, 113(3), 11-15.

Conference Contribution - Published proceedings: Abstract

Choi, J., Ng, T. E., Leong, C. K., Kim, H. S., Li, P., Jansen van Vuuren, W., & Waddell, N. (2017). Bond strength between modern denture base acrylics and reline materials. New Zealand Dental Journal, 113(4), (pp. 54). [Abstract]

Choi, J. J. E., Ng, T., Leong, C., Kim, H., Li, P., Jansen van Vuuren, W.-A., & Waddell, N. (2017). Bond strength between modern denture base acrylics and reline materials. Journal of Dental Research, 96(Spec. Iss. A), 2619. Retrieved from http://www.iadr.org

Waddell, J., Yusof, A., Li, K., Choi, J., Jansen van Vuuren, L., & Jansen van Vuuren, W.-A. (2017). Strength of a novel glass etch and prime resin bonding system. Journal of Dental Research, 96(Spec. Iss. A), 0761. Retrieved from http://www.iadr.org

2016

Journal - Research Article

Tawse-Smith, A., Kota, A., Jayaweera, Y., Jansen van Vuuren, W., & Ma, S. (2016). The effect of standardised implantoplasty protocol on titanium surface roughness: An in-vitro study. Brazilian Oral Research, 30(1), e137. doi: 10.1590/1807-3107BOR-2016.vol30.0137

Jansen van Vuuren, W.-A., Jansen van Vuuren, L., Torr, B., & Waddell, J. N. (2016). Adhesion between zirconia and indirect composite resin. International Journal of Adhesion & Adhesives, 69, 72-78. doi: 10.1016/j.ijadhadh.2016.03.011

Conference Contribution - Published proceedings: Abstract

Jansen van Vuuren, W.-A., Khoo, C. S. T., Ng, B. S. K., Waddell, J. N., & Al-Amleh, B. (2016). Effect of condensation on flexural strength of porcelain. Proceedings of the Sir John Walsh Research Institute Research Symposium. (pp. 23). Retrieved from http://www.otago.ac.nz/sjwri/news/otago621026

2015

Journal - Research Article

Tawse-Smith, A., Ma, S., Wu, H., Yeah, A., Jansen Van Vuuren, L., & Jansen van Vuuren, W. (2015). Changes in surface characteristics of moderately roughened grade IV titanium disc following a standardised implantoplasty technique: An in-vitro study. Brazilian Journal of Periodontology, 25(2), 22-33.

Journal - Professional & Other Non-Research Articles

Jansen van Vuuren, W.-A. (2015). [Review of the book Layers: An atlas of composite resin stratification]. New Zealand Dental Journal, 111(2), 82. [Book Review].

Jansen van Vuuren, W.-A. (2015). [Review of the book QDT (Quintessence of dental technology) 2014]. New Zealand Dental Journal, 111(1), 43. [Book Review].

2014

Journal - Research Article

Tiu, J., Waddell, J. N., Al-Amleh, B., Jansen van Vuuren, W.-A., & Swain, M. V. (2014). Coordinate geometry method for capturing and evaluating crown preparation geometry. Journal of Prosthetic Dentistry, 112(3), 481-487. doi: 10.1016/j.prosdent.2013.11.012

Conference Contribution - Published proceedings: Abstract

Jansen van Vuuren, W., Jansen van Vuuren, L., Torr, B., & Waddell, J. N. (2014). Bond strength between indirect veneering composite material and zirconia. Journal of Dental Research, 93(Spec Iss B), 1459. Retrieved from http://www.iadr.org

2007

Journal - Research Article

Jansen van Vuuren, W., Jansen van Vuuren, L., & van Eeden, R. (2007). Esthetic and practical method using glass composite veneering material to fabricate artificial soft tissue on full arch titanium implant bridges. International Dentistry South Africa, 9(4), 74-78.

Conference Contribution - Poster Presentation (not in published proceedings)

Jansen van Vuuren, W., Jansen van Vuuren, L., & van Eeden, R. (2007, May). Esthetic and practical method of using glass composite veneering material to fabricate artificial soft tissue on full arch titanium Procera^® Implant Bridges. Poster session presented at the Nobel Biocare World Conference, Las Vegas, USA.