2025
Journal - Research Article
Li, G. H., Mudaliar, V., Cameron, A. B., Aarts, J. M., & Choi, J. J. E. (2025). Influence of stainless steel mesh size and universal adhesive primer on flexural strength of repaired PMMA denture base resin. Clinical & Experimental Dental Research, 11, e70127. doi: 10.1002/cre2.70127
Chen, P. X., Aarts, J. M., & Choi, J. J. E. (2025). Mechanical properties and accuracy of additively manufactured silicone soft tissue materials. Journal of Manufacturing & Materials Processing, 9, 113. doi: 10.3390/jmmp9040113
Singh, J., Cameron, A. B., & Choi, J. J. E. (2025). The effect of cement shade on the optical properties of additively manufactured permanent crown materials. Journal of Esthetic & Restorative Dentistry. Advance online publication. doi: 10.1111/jerd.13475
Journal - Research Other
Hwang, K.-C., Choi, J. J. E., Hussaini, H. M., Cooper, P. R., & Friedlander, L. T. (2025). Effect of diabetes and hyperglycaemia on the physical and mechanical properties of dentine: A systematic review. Clinical Oral Investigations, 29, 55. doi: 10.1007/s00784-025-06151-5
2024
Journal - Research Article
Grymak, A., Aarts, J. M., Cameron, A., & Choi, J. J. E. (2024). Evaluation of wear resistance and surface properties of 3D printed restorative dental materials. Journal of Dentistry, 147, 105120. doi: 10.1016/j.jdent.2024.105120
Mane, R., Sharpe-Davidson, W. F., De Silva, H., & Choi, J. J. E. (2024). The perception of the scope of oral and maxillofacial surgery and differentiation from similar specialities among dental students, medical students, trainee interns and pre-vocational junior doctors. Oral & Maxillofacial Surgery. Advance online publication. doi: 10.1007/s10006-024-01261-y
Mei, L., Jin, C., Na, A., Marra, J., Guan, S., & Choi, J. (2024). Biomechanical aging behaviour of clear aligners. Australian Orthodontic Journal, 40(1), 60-66. doi: 10.2478/aoj-2024-0006)
Cameron, A. B., Choi, J. J. E., Ip, A., Lyons, N., Yaparathna, N., Dehaghani, A. E., & Feih, S. (2024). Assessment of the trueness of additively manufactured mol3% zirconia crowns at different printing orientations with an industrial and desktop 3D printer compared to subtractive manufacturing. Journal of Dentistry, 144, 104942. doi: 10.1016/j.jdent.2024.104942
Kagaoan, Z., Liu, X., Cameron, A., Aarts, J., & Choi, J. (2024). Prolonged post-washing in ethanol decreases bond strength of additively manufactured crown materials. Journal of Dentistry. Advance online publication. doi: 10.1016/j.jdent.2024.104873
Gunawan, V., Carrington, S. D., Choi, Y. J., & Choi, J. J. E. (2024). Air-polishing technology is an effective alternative chairside method for cleaning dentures. International Journal of Dental Hygiene, 22(3), 626-638. doi: 10.1111/idh.12735
Journal - Research Other
Du, K., Muao, T., Plaksina, P., Hung, T.-H., Cameron, A. B., & Choi, J. J. E. (2024). Masking ability of subtractively and additively manufactured dental ceramic restorations: A systematic review. Journal of Esthetic & Restorative Dentistry. Advance online publication. doi: 10.1111/jerd.13406
Liu, X., Cameron, A. B., Haugli, K. H., Mougios, A. A., Heng, N. C. K., & Choi, J. J. E. (2024). Influence of CAD/CAM diamond bur wear on the accuracy and surface roughness of dental ceramic restorations: A systematic review. Journal of the Mechanical Behavior of Biomedical Materials, 106813. Advance online publication. doi: 10.1016/j.jmbbm.2024.106813
Kagaoan, Z., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2024). Factors influencing the bond strength of additively manufactured crown materials in dentistry: A systematic review of in vitro studies. Journal of Dentistry, 104908. Advance online publication. doi: 10.1016/j.jdent.2024.104908
Cao, J., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2024). Influence of different post-processing methods on the dimensional accuracy of 3D-printed photopolymers for dental crown applications: A systematic review. Journal of the Mechanical Behavior of Biomedical Materials, 150, 106314. doi: 10.1016/j.jmbbm.2023.106314
2023
Journal - Research Article
Huang, Z., Broadbent, J. M., & Choi, J. J. E. (2023). Comparison of dental flosses: An investigation of subjective preference and mechanical properties. Biomaterial Investigations in Dentistry, 10(1), 2258919. doi: 10.1080/26415275.2023.2258919
Liu, X., Aarts, J. M., Ma, S., & Choi, J. J. E. (2023). The impact of different polishing systems on yttria-stabilized tetragonal zirconia polycrystalline crowns in relation to heat generation. Clinical & Experimental Dental Research, 9(5), 799-809. doi: 10.1002/cre2.778
Grymak, A., Tieh, M. T., Yang, A. H. X., & Choi, J. J. E. (2023). Development of predictive algorithms for the wear resistance of denture teeth materials. Journal of the Mechanical Behavior of Biomedical Materials, 144, 105984. doi: 10.1016/j.jmbbm.2023.105984
Khashashneh, M., Ratnayake, J., Choi, J. J. E., Mei, L., Lyons, K., & Brunton, P. (2023). The effect of 10% carbamide peroxide dental bleaching on the physical properties of Invisalign aligners: An in vitro study. Materials, 16, 4125. doi: 10.3390/ma16114125
Chiong, L., Choi, J., & Ma, S. (2023). Effects of different chairside CAM speeds on the roughness and marginal adaption of zirconia crowns: An in vitro study. International Journal of Prosthodontics & Restorative Dentistry, 13(1), 35-38. doi: 10.5005/jp-journals-10019-1395
Lau, X. E., Ma, S., & Choi, J. (2023). New aerosol-decreasing dental handpiece functions sufficiently decrease pulp temperature: An in vitro study. Journal of Prosthodontics, 13672. Advance online publication. doi: 10.1111/jopr.13672
Grymak, A., Badarneh, A., Ma, S., & Choi, J. J. E. (2023). Effect of various printing parameters on the accuracy (trueness and precision) of 3D-printed partial denture framework. Journal of the Mechanical Behavior of Biomedical Materials, 140, 105688. doi: 10.1016/j.jmbbm.2023.105688
Choi, J. J. E., Chen, J., Choi, Y. J., Moffat, S. M., Duncan, W. J., Waddell, J. N., & Jermy, M. (2023). Dental high-speed handpiece and ultrasonic scaler aerosol generation levels and the effect of suction and air supply. Infection Control & Hospital Epidemiology, 44, 926-933. doi: 10.1017/ice.2022.196
Zheng, J., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2023). Different undercut depths influence on fatigue behavior and retentive force of removable partial denture clasp materials: A systematic review. Journal of Prosthodontics, 32, 108-115. doi: 10.1111/jopr.13519
Journal - Research Other
Khaw, S., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2023). Factors influencing the dimensional accuracy of additively manufactured dental models: A systematic review of in vitro studies. Journal of the Mechanical Behavior of Biomedical Materials, 146, 10657. doi: 10.1016/j.jmbbm.2023.106057
Liu, X., Aarts, J. M., Ma, S., & Choi, J. J. E. (2023). The influence of polishing on the mechanical properties of zirconia: A systematic review. Oral, 3, 101-122. doi: 10.3390/oral3010010
Lau, X. E., Liu, X., Chua, H., Wang, W. J., Dias, M., & Choi, J. J. E. (2023). Heat generated during dental treatments affecting intrapulpal temperature: A review. Clinical Oral Investigations, 27(5), 2277-2297. doi: 10.1007/s00784-023-04951-1
Conference Contribution - Published proceedings: Abstract
Grymak, A., Choi, J., Aarts, J., & Cameron, A. (2023). Prediction of wear resistance in 3D-printed permanent crown materials. Proceedings of the Graduate Research Student Symposium. (pp. 13-14). Retrieved from https://www.otago.ac.nz/graduate-research
Kagaoan, Z., Liu, X., Cameron, A., Aarts, J., & Choi, J. J. E. (2023). Prolonged cleaning in ethanol decreases bond strength of 3D-printed crowns. In T. Milne, M. Anwar, L. Burga, H. Harcombe, M. Garelja, A. Middleton, D. C. Ribeiro, N. Fleming, K. Ogbuehi & A. Bahn (Eds.), Proceedings of the 268th Otago Medical School Research Society (OMSRS) Meeting: Masters/Honours/Postgraduate Diploma Student Speaker Awards. Dunedin, New Zealand: OMSRS. Retrieved from https://ourarchive.otago.ac.nz/handle/10523/12839
Gunawan, V., & Choi, J. J. E. (2023). The stability of single-shade composite resins in the oral cavity. In T. Milne, M. Anwar, L. Burga, H. Harcombe, M. Garelja, A. Middleton, D. C. Ribeiro, N. Fleming, K. Ogbuehi & A. Bahn (Eds.), Proceedings of the 265th Otago Medical School Research Society (OMSRS) Meeting: Summer Student Speaker Awards. Dunedin, New Zealand: OMSRS. Retrieved from https://ourarchive.otago.ac.nz/handle/10523/12839
Conference Contribution - Verbal presentation and other Conference outputs
Khashashneh, M., Brunton, P., Lyons, K., Mei, P., & Choi, J. (2023, July). The effect of 10% carbamide peroxide dental bleaching on the physical properties of Invisalign aligners. Verbal presentation at the Faculty of Dentistry Clinical and Research Excellence Symposium, Dunedin, New Zealand.
2022
Journal - Research Article
Zheng, J., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2022). Fatigue behavior of removable partial denture cast and laser-sintered cobalt-chromium (CoCr) and polyetheretherketone (PEEK) clasp materials. Clinical & Experimental Dental Research, 8, 1496-1504. doi: 10.1002/cre2.645
Seto, T. H., Grymak, A., Mudliar, V., & Choi, J. J. E. (2022). Effect of enamel bleaching on the bond strength of ceramic: A systematic review. Oral, 2, 182-197. doi: 10.3390/oral2020018
Badarneh, A., Choi, J. J. E., Lyons, K., Porter, G., Waddell, N., & Li, K. C. (2022). The effect of aging on the wear performance of monolithic zirconia. Dental Materials, 38, E136-E146. doi: 10.1016/j.dental.2022.04.018
Phua, E. M. J., Waddell, J. N., & Choi, J. J. E. (2022). Curing through ceramics: Influence of different light-curing units and curing modes on bond strength. Oral, 2, 62-74. doi: 10.3390/oral2010008
Pong, M. T., Grymak, A., Waddell, J. N., & Choi, J. J. E. (2022). Bond strength between CAD/CAM PMMA denture base resins and characterisation composites. Oral, 2, 75-87. doi: 10.3390/oral2010009
Yong, D., Choi, J. J. E., Cathro, P., Cooper, P. R., Dias, G., Huang, J., & Ratnayake, J. (2022). Development and analysis of a hydroxyapatite supplemented calcium silicate cement for endodontic treatment. Materials, 15(3), 1176. doi: 10.3390/ma15031176
Grymak, A., Waddell, J. N., Aarts, J. M., Ma, S., & Choi, J. J. E. (2022). Evaluation of wear behaviour of various occlusal splint materials and manufacturing processes. Journal of the Mechanical Behavior of Biomedical Materials, 126, 105053. doi: 10.1016/j.jmbbm.2021.105053
Tieh, M. T., Waddell, J. N., & Choi, J. J. E. (2022). Optical and mechanical properties of conventional, milled and 3D-printed denture teeth. Journal of the Mechanical Behavior of Biomedical Materials, 126, 105061. doi: 10.1016/j.jmbbm.2021.105061
Tieh, M. T., Waddell, J. N., & Choi, J. J. E. (2022). Optical properties and color stability of denture teeth: A systematic review. Journal of Prosthodontics, 31, 385-398. doi: 10.1111/jopr.13429
Journal - Research Other
Mudliar, V. L., Tieh, M. T., Aarts, J. M., Paras, A., & Choi, J. J. E. (2022). Wear of modern denture teeth: A systematic review. Oral, 2, 95-111. doi: 10.3390/oral2010011
Khashashneh, M., Ratnayake, J., Choi, J. J. E., Mei, L., Lyons, K., & Brunton, P. A. (2022). The effectiveness of dental bleaching during orthodontic treatment with clear aligners: A systematic review. Applied Sciences, 12(21), 11274. doi: 10.3390/app122111274
Badarneh, A., Choi, J. J. E., Lyons, K., Waddell, J. N., & Li, K. C. (2022). Wear behaviour of monolithic zirconia against human enamel: A literature review. Biotribology, 32, 100224. doi: 10.1016/j.biotri.2022.100224
Paras, A., Ma, S., Waddell, J. N., & Choi, J. J. E. (2022). Denture-mucosa pressure distribution and pressure-pain threshold in vivo, in vitro and in silico studies: A literature review. Oral, 2, 112-125. doi: 10.3390/oral2010012
Grymak, A., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2022). Wear behavior of occlusal splint materials manufactured by various methods: A systematic review. Journal of Prosthodontics, 31, 472-487. doi: 10.1111/jopr.13432
Conference Contribution - Published proceedings: Abstract
Seow, J. M., Ma, S., Choi, J. J. E., & Tawse-Smith, A. (2022). Repairability of 3D-printed dentures. New Zealand Medical Journal, 135(1557), (pp. 104-105). Retrieved from https://journal.nzma.org.nz/
2021
Journal - Research Article
Ganjigatti, R. R., Bennani, V., Aarts, J. M., Choi, J. J. E., & Brunton, P. A. (2021). Efficacy and safety of Botulinum toxinA for improving esthetics in facial complex: A systematic review. Brazilian Dental Journal, 32(4), 31-44. doi: 10.1590/0103-6440202104127
Wang, W. J., Grymak, A., Waddell, J. N., & Choi, J. J. E. (2021). The effect of light curing intensity on bulk-fill composite resins: Heat generation and chemomechanical properties. Biomaterial Investigations in Dentistry, 8(1), 137-151. doi: 10.1080/26415275.2021.1979981
Li, G. H., Chen, S., Grymak, A., Waddell, J. N., Kim, J. J., & Choi, J. J. E. (2021). Fibre-reinforced and repaired PMMA denture base resin: Effect of placement on the flexural strength and load-bearing capacity. Journal of the Mechanical Behavior of Biomedical Materials, 124, 104828. doi: 10.1016/j.jmbbm.2021.104828
Li, E. G., Waddell, J. N., & Choi, J. J. E. (2021). Wear resistance of bulk-fill dental resins cured by different light-curing settings. Biotribology, 28, 100197. doi: 10.1016/j.biotri.2021.100197
Choi, J. J. E., Plaksina, P., Foster Page, L., Waddell, J. N., & Duncan, W. J. (2021). A novel tooth-colored crown system to treat dental caries in children: Development and validation. New Zealand Dental Journal, 117(2), 55-65.
Paras, A., Ma, S., Waddell, J. N., & Choi, J. J. E. (2021). Real-time in vitro measurement of denture-mucosa pressure distribution in a typical edentulous patient with and without implants: Development of a methodology. Journal of the Mechanical Behavior of Biomedical Materials. doi: 10.1016/j.jmbbm.2021.104531
Choi, J. J. E., Chen, S., & Waddell, J. N. (2021). Investigation of dental elastomers as oral mucosa simulant materials. Clinical & Experimental Dental Research, 7, 754-762. doi: 10.1002/cre2.399
Grymak, A., Aarts, J. M., Ma, S., Waddell, J. N., & Choi, J. J. E. (2021). Comparison of hardness and polishability of various occlusal splint materials. Journal of the Mechanical Behavior of Biomedical Materials, 115, 104270. doi: 10.1016/j.jmbbm.2020.104270
Aarts, J. M., Choi, J. J. E., Metcalfe, S., & Bennani, V. (2021). Influence of build angulation on the mechanical properties of a direct-metal laser-sintered cobalt-chromium used for removable partial denture frameworks. Journal of Prosthetic Dentistry, 126, 224-230. doi: 10.1016/j.prosdent.2020.06.014
Tykhonova, L. Y., Dias, M., Zhou, L. D., Richardson, C., Waddell, J. N., & Choi, J. J. E. (2021). The efficacy of a novel temporary crown system marginal seal and structural durability in terms of cyclic loading: A pilot study. Dental Oral Biology & Craniofacial Research, 3(1), 2-7. doi: 10.31487/j.DOBCR.2020.01.01
Journal - Research Other
Mane, R. J., Choi, J. J. E., & Sharpe-Davidson, W. F. (2021). Tramadol as a local anaesthetic agent in dentistry: A systematic review of local and systemic adverse effects. Saudi Dental Journal, 33, 842-852. doi: 10.1016/j.sdentj.2021.09.015
Conference Contribution - Verbal presentation and other Conference outputs
Choi, J. (2021, August). How we find answers to the everyday problems in dentistry? Verbal presentation at the New Zealand Institute of Dental Technologists (NZIDT) Conference, Wellington, New Zealand.
2020
Journal - Research Article
Choi, J. J. E., Ramani, R. S., Ganjigatti, R., Uy, C. E., Plaksina, P., & Waddell, J. N. (2020). Adhesion of denture characterizing composites to heat-cured, CAD/CAM and 3D printed denture base resins. Journal of Prosthodontics, 30, 83-90. doi: 10.1111/jopr.13291
Ramani, R. S., Bennani, V., Aarts, J. M., Choi, J. J. E., & Brunton, P. A. (2020). Patient satisfaction with esthetics, phonetics, and function following implant-supported fixed restorative treatment in the esthetic zone: A systematic review. Journal of Esthetic & Restorative Dentistry, 32, 662-672. doi: 10.1111/jerd.12625
Choi, J. J. E., Zwirner, J., Ramani, R. S., Ma, S., Hussaini, H. M., Waddell, J. N., & Hammer, N. (2020). Mechanical properties of human oral mucosa tissues are site dependent: A combined biomechanical, histological and ultrastructural approach. Clinical & Experimental Dental Research, 6, 602-611. doi: 10.1002/cre2.305
Choi, J. J. E., Uy, C. E., Ramani, R. S., & Waddell, J. N. (2020). Evaluation of surface roughness, hardness and elastic modulus of nanoparticle containing light-polymerized denture glaze materials. Journal of the Mechanical Behavior of Biomedical Materials, 103, 103601. doi: 10.1016/j.jmbbm.2019.103601
Choi, J. J. E., Uy, C. E., Plaksina, P., Ramani, R. S., Ganjigatti, R., & Waddell, J. N. (2020). Bond strength of denture teeth to heat-cured, CAD/CAM and 3D printed denture acrylics. Journal of Prosthodontics, 29, 415-421. doi: 10.1111/jopr.13125
Conference Contribution - Published proceedings: Abstract
Chua, H., Choi, J., & Waddell, J. N. (2020). The cooling efficiency of different dental high-speed handpiece coolant port designs. New Zealand Medical Journal, 133(1518), (pp. 94). Retrieved from https://www.nzma.org.nz/journal
2019
Journal - Research Article
Dias, M., Choi, J. J. E., Uy, C. E., Ramani, R. S., Ganjigatti, R., & Waddell, J. N. (2019). Real-time pulp temperature change at different tooth sites during fabrication of temporary resin crowns. Heliyon, 5(12), e02971. doi: 10.1016/j.heliyon.2019.e02971
Chua, H., Choi, J. J. E., Ramani, R. S., Ganjigatti, R., & Waddell, J. N. (2019). The cooling efficiency of different dental high-speed handpiece coolant port designs. Heliyon, 5, e02185. doi: 10.1016/j.heliyon.2019.e02185
2018
Journal - Research Article
Choi, J. E., Ng, T. E., Leong, C. K. Y., Kim, H., Li, P., & Waddell, J. N. (2018). Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases. Journal of Prosthetic Dentistry, 120(5), 699-705. doi: 10.1016/j.prosdent.2018.01.032
Journal - Research Other
Brooks, T., Choi, J. E., Garnich, M., Hammer, N., Waddell, J. N., Duncan, W., & Jermy, M. (2018). Finite element models and material data for analysis of infant head impacts. Heliyon, 4(12), e01010. doi: 10.1016/j.heliyon.2018.e01010
2017
Journal - Research Article
Aarts, J. M., Jansen van Vuuren, W.-A., Withy, K. E., Choi, J. E., & Waddell, N. J. (2017). A pilot study on the influence of two reinforcing materials (glass fibre mesh and electro-spun nylon nano fibres) on the flexural strength of a heat-cured poly (methyl methacrylate) denture base resin. New Zealand Dental Journal, 113(3), 11-15.
Choi, J. E., Lyons, K. M., Kieser, J. A., & Waddell, N. J. (2017). Diurnal variation of intraoral pH and temperature. BDJ Open, 3, 17015. doi: 10.1038/bdjopen.2017.15
Journal - Professional & Other Non-Research Articles
Choi, J. (2017). [Review of the book Foundations of dental technology: Anatomy and physiology]. New Zealand Dental Journal, 113(1), 48. [Book Review].
Conference Contribution - Published proceedings: Abstract
Choi, J., Ng, T. E., Leong, C. K., Kim, H. S., Li, P., Jansen van Vuuren, W., & Waddell, N. (2017). Bond strength between modern denture base acrylics and reline materials. New Zealand Dental Journal, 113(4), (pp. 54). [Abstract]
Choi, J. J. E., Ng, T., Leong, C., Kim, H., Li, P., Jansen van Vuuren, W.-A., & Waddell, N. (2017). Bond strength between modern denture base acrylics and reline materials. Journal of Dental Research, 96(Spec. Iss. A), 2619. Retrieved from http://www.iadr.org
Waddell, J., Yusof, A., Li, K., Choi, J., Jansen van Vuuren, L., & Jansen van Vuuren, W.-A. (2017). Strength of a novel glass etch and prime resin bonding system. Journal of Dental Research, 96(Spec. Iss. A), 0761. Retrieved from http://www.iadr.org
Awarded Doctoral Degree
Choi, J. J. E. (2017). Continuous measurement of intraoral pH and temperature (PhD). University of Otago, Dunedin, New Zealand. Retrieved from http://hdl.handle.net/10523/7308
2016
Journal - Research Article
Choi, J. E., Lyons, K. M., McLean, M. C. B., & Waddell, J. N. (2016). Interarch comparison of intraoral pH and temperature: A pilot study. BDJ Open, 2, 16008. doi: 10.1038/bdjopen.2016.8
Choi, J. E., Waddell, J. N., Lyons, K. M., & Kieser, J. A. (2016). Intraoral pH and temperature during sleep with and without mouth breathing. Journal of Oral Rehabilitation, 43(5), 356-363. doi: 10.1111/joor.12372
Journal - Professional & Other Non-Research Articles
Choi, J. (2016). Author Q & A. British Dental Journal, 222(1), 26.
Conference Contribution - Published proceedings: Abstract
Choi, J. J. E., Lyons, K., Mclean, M., Kieser, J., & Waddell, N. (2016). Inter-arch comparison of intraoral pH and temperature: A pilot study. Journal of Dental Research, 95(Spec Iss B), 1870. Retrieved from http://www.iadr.org/
2015
Journal - Research Article
Choi, J. E., Loke, C., Waddell, J. N., Lyons, K. M., Kieser, J. A., & Farella, M. (2015). Continuous measurement of intra-oral pH and temperature: Development, validation of an appliance and a pilot study. Journal of Oral Rehabilitation, 42(8), 563-570. doi: 10.1111/joor.12294
Conference Contribution - Published proceedings: Abstract
Choi, J., Waddell, N., Lyons, K., Farella, M., & Kieser, J. (2015). Intraoral pH and temperature during sleep. Journal of Dental Research, 94(Spec Iss B), 2308042. Retrieved from http://www.iadr.org/
2014
Conference Contribution - Published proceedings: Abstract
Choi, J., Waddell, J. N., Farella, M., & Kieser, J. A. (2014). Continuous and simultaneous measurement of intraoral pH and temperature. Journal of Dental Research, 93(Spec Iss C). Retrieved from http://www.iadr.org
Choi, J. E., Kieser, J. A., Farella, M., & Waddell, J. N. (2014). Continuous measurement of intra-oral pH during sleep: A pilot study. Journal of Dental Research, 93(Spec Iss B), 367. Retrieved from http://www.iadr.org
Conference Contribution - Poster Presentation (not in published proceedings)
Choi, J. E., Waddell, J. N., Farella, M., & Kieser, J. A. (2014, May). Continuous measurement of intraoral pH and temperature: Development and validation of an appliance. Poster session presented at the International Association for Dental Research (IADR) New Zealand Section Student Poster Competition, Dunedin, New Zealand.
Choi, J., Waddell, N., Lyons, K., Kieser, J., & Farella, M. (2014, September). Continuous and simultaneous measurement of intraoral pH and temperature. Poster session presented at the Division of Health Sciences Research Forum: Learning Different Research Languages, Dunedin, New Zealand.
2013
Conference Contribution - Published proceedings: Abstract
Choi, J. (2013). Pressed ceramics onto zirconia: Intrinsic properties and influence of cooling rate on residual stresses. Proceedings of the Sir John Walsh Research Institute Research Day. (pp. 20). Retrieved from http://sjwri.otago.ac.nz/research/sjwri/
2011
Journal - Research Article
Choi, J. E., Waddell, J. N., Torr, B., & Swain, M. V. (2011). Pressed ceramics onto zirconia. Part 1: Comparison of crystalline phases present, adhesion to a zirconia system and flexural strength. Dental Materials, 27(12), 1204-1212. doi: 10.1016/j.dental.2011.08.006
Choi, J. E., Waddell, J. N., & Swain, M. V. (2011). Pressed ceramics onto zirconia: Part 2: Indentation fracture and influence of cooling rate on residual stresses. Dental Materials, 27(11), 1111-1118. doi: 10.1016/j.dental.2011.08.003
2010
Conference Contribution - Published proceedings: Abstract
Swain, M. V., Choi, J. E., Waddell, J. N., & Torr, B. (2010). Pressed ceramics onto zirconia: Adhesion, strength, toughness and residual stress. Journal of Dental Research, 89(Spec Iss C). Retrieved from http://www.dentalresearch.org
2009
Conference Contribution - Verbal presentation and other Conference outputs
Waddell, N., Choi, J., & Park, T. (2009, October). How to deal with residual stress in zirconia ceramic restorations. Verbal presentation at the New Zealand Institute of Dental Technologists (NZIDT) Annual Conference, Auckland, New Zealand.
