2025
Journal - Research Article
Ung, S., Veerasamy, A., Jansen van Vuuren, W.-A., & Bennani, V. (2025). Effect of a modified preparation design on the marginal and internal fit of 3D-printed onlays: A feasibility study. International Journal of Dentistry. Advance online publication. doi: 10.1155/ijod/7599339
Veerasamy, A., Ghuloum, F., Lo, Y., & Jansen van Vuuren, W. (2025). Digital removable denture workflows in dental education: A systematic review and curriculum development exploration. European Journal of Dental Education. Advance online publication. doi: 10.1111/eje.70001
Horsnell, A., Farella, M., Tompkins, G., & Jansen van Vuuren, W.-A. (2025). Comparison of biofilm accumulation on conventional and CAD/CAM orthodontic band alloys (in vivo) and subsequent enamel demineralization (ex vivo). Journal of Biomedical Materials Research Part B, 113, e35573. doi: 10.1002/jbm.b.35573
Conference Contribution - Published proceedings: Abstract
Low, E., Bhattacharjee, T., Harris, P., Petherick, R., Jansen van Vuuren, W.-A., Ma, S., & Duncan, W. (2025). Early detection of gingivitis using a novel ultrasound elastography device: A pilot study. Journal of Clinical Periodontology, 52(Suppl. 28), PR041. doi: 10.1111/jcpe.14160
Conference Contribution - Verbal presentation and other Conference outputs
Alsafadi, S. H. M., Li, K. C., Jansen van Vuuren, W.-A., & Ma, S. (2025, September). The effects of thermocycling and chemical ageing on the aesthetic and physical properties of highly translucent polychromatic monolithic zirconia (HTPMZ) crowns. Verbal presentation at the Faculty of Dentistry Clinical and Research Excellence Symposium, Dunedin, New Zealand.
2023
Journal - Research Article
Reyes, K., Plaksina, P., Barazanchi, A., Jansen van Vuuren, W.-A., Waddell, J. N., & Li, K. C. (2023). Microleakage of chairside moulded, 3D-printed and milled provisional restorations using a curve-fit approach. Brazilian Dental Journal, 34(6), 91-99. doi: 10.1590/0103-6440202305644
Jansen van Vuuren, L., Jansen van Vuuren, W. A., Broadbent, J. M., Duncan, W. J., & Waddell, J. N. (2023). Measurement of tooth displacement. Journal of the Mechanical Behavior of Biomedical Materials, 146, 106059. doi: 10.1016/j.jmbbm.2023.106059
Conference Contribution - Verbal presentation and other Conference outputs
Jansen van Vuuren, L., Broadbent, J. M., Duncan, W. J., Jansen van Vuuren, W. A., & Waddell, J. N. (2023, July). Dental occlusal stress. Verbal presentation at the Faculty of Dentistry Clinical and Research Excellence Symposium, Dunedin, New Zealand.
2020
Journal - Research Article
Jansen van Vuuren, W., Jansen van Vuuren, L., Aarts, J., Hanlin, S., & Waddell, J. N. (2020). Mechanical properties of denture base resin materials: CAD/CAM versus traditional heat-cure. New Zealand Dental Journal, 116(3), 81-89.
Jansen van Vuuren, L., Jansen van Vuuren, W. A., Broadbent, J. M., Duncan, W. J., & Waddell, J. N. (2020). Development of a bite force transducer for measuring maximum voluntary bite forces between individual opposing tooth surfaces. Journal of the Mechanical Behavior of Biomedical Materials, 109, 103846. doi: 10.1016/j.jmbbm.2020.103846
2019
Journal - Research Article
Jansen van Vuuren, W.-A., Al-Amleh, B., Alkharusi, A., Dohan, Z., & Waddell, J. N. (2019). Surface Crack in Flexure versus the Vickers indentation method for calculating fracture toughness in two veneering procelains. New Zealand Dental Journal, 115(4), 151-156.
Gowans, L. J. J., Cameron-Christie, S., Slayton, R. L., Busch, T., Romero-Bustillos, M., Eliason, S., … Drummond, B. K., Markie, D. M., Jansen van Vuuren, W., Jansen van Vuuren, L., … van Staden, I., … Robertson, S. P., & Butali, A. (2019). Missense pathogenic variants in KIF4A affect dental morphogenesis resulting in X-linked taurodontism, microdontia and dens-invaginatus. Frontiers in Genetics, 10, 800. doi: 10.3389/fgene.2019.00800
2018
Journal - Research Article
Jansen van Vuuren, W.-A., Khoo, C. S. T., Ng, B. S. K., Waddell, J. N., & Al-Amleh, B. (2018). The effect of condensing on mechanical properties of feldspathic veneering porcelain. New Zealand Dental Journal, 114(1), 13-18.
Jansen van Vuuren, W.-A., Wong, P., Al-Amleh, B., Lyons, K. M., Li, K. C., & Waddell, J. N. (2018). Effect of a glaze layer on adhesion energy between resin cements to zirconia ceramic. International Journal of Adhesion & Adhesives, 84, 451-456. doi: 10.1016/j.ijadhadh.2018.03.003
2017
Journal - Research Article
Jansen van Vuuren, W.-A., Milmine, H., Al-Amleh, B., Lyons, K. M., & Waddell, N. J. (2017). Effect of multiple firings on the physical properties of a CAD/CAM produced lithium disilicate restorative material. New Zealand Dental Journal, 113(4), 31-38.
Aarts, J. M., Jansen van Vuuren, W.-A., Withy, K. E., Choi, J. E., & Waddell, N. J. (2017). A pilot study on the influence of two reinforcing materials (glass fibre mesh and electro-spun nylon nano fibres) on the flexural strength of a heat-cured poly (methyl methacrylate) denture base resin. New Zealand Dental Journal, 113(3), 11-15.
Conference Contribution - Published proceedings: Abstract
Choi, J., Ng, T. E., Leong, C. K., Kim, H. S., Li, P., Jansen van Vuuren, W., & Waddell, N. (2017). Bond strength between modern denture base acrylics and reline materials. New Zealand Dental Journal, 113(4), (pp. 54). [Abstract]
Choi, J. J. E., Ng, T., Leong, C., Kim, H., Li, P., Jansen van Vuuren, W.-A., & Waddell, N. (2017). Bond strength between modern denture base acrylics and reline materials. Journal of Dental Research, 96(Spec. Iss. A), 2619. Retrieved from http://www.iadr.org
Waddell, J., Yusof, A., Li, K., Choi, J., Jansen van Vuuren, L., & Jansen van Vuuren, W.-A. (2017). Strength of a novel glass etch and prime resin bonding system. Journal of Dental Research, 96(Spec. Iss. A), 0761. Retrieved from http://www.iadr.org
2016
Journal - Research Article
Tawse-Smith, A., Kota, A., Jayaweera, Y., Jansen van Vuuren, W., & Ma, S. (2016). The effect of standardised implantoplasty protocol on titanium surface roughness: An in-vitro study. Brazilian Oral Research, 30(1), e137. doi: 10.1590/1807-3107BOR-2016.vol30.0137
Jansen van Vuuren, W.-A., Jansen van Vuuren, L., Torr, B., & Waddell, J. N. (2016). Adhesion between zirconia and indirect composite resin. International Journal of Adhesion & Adhesives, 69, 72-78. doi: 10.1016/j.ijadhadh.2016.03.011
Conference Contribution - Published proceedings: Abstract
Jansen van Vuuren, W.-A., Khoo, C. S. T., Ng, B. S. K., Waddell, J. N., & Al-Amleh, B. (2016). Effect of condensation on flexural strength of porcelain. Proceedings of the Sir John Walsh Research Institute Research Symposium. (pp. 23). Retrieved from http://www.otago.ac.nz/sjwri/news/otago621026
2015
Journal - Research Article
Tawse-Smith, A., Ma, S., Wu, H., Yeah, A., Jansen Van Vuuren, L., & Jansen van Vuuren, W. (2015). Changes in surface characteristics of moderately roughened grade IV titanium disc following a standardised implantoplasty technique: An in-vitro study. Brazilian Journal of Periodontology, 25(2), 22-33.
Journal - Professional & Other Non-Research Articles
Jansen van Vuuren, W.-A. (2015). [Review of the book Layers: An atlas of composite resin stratification]. New Zealand Dental Journal, 111(2), 82. [Book Review].
Jansen van Vuuren, W.-A. (2015). [Review of the book QDT (Quintessence of dental technology) 2014]. New Zealand Dental Journal, 111(1), 43. [Book Review].
2014
Journal - Research Article
Tiu, J., Waddell, J. N., Al-Amleh, B., Jansen van Vuuren, W.-A., & Swain, M. V. (2014). Coordinate geometry method for capturing and evaluating crown preparation geometry. Journal of Prosthetic Dentistry, 112(3), 481-487. doi: 10.1016/j.prosdent.2013.11.012
Conference Contribution - Published proceedings: Abstract
Jansen van Vuuren, W., Jansen van Vuuren, L., Torr, B., & Waddell, J. N. (2014). Bond strength between indirect veneering composite material and zirconia. Journal of Dental Research, 93(Spec Iss B), 1459. Retrieved from http://www.iadr.org
2007
Journal - Research Article
Jansen van Vuuren, W., Jansen van Vuuren, L., & van Eeden, R. (2007). Esthetic and practical method using glass composite veneering material to fabricate artificial soft tissue on full arch titanium implant bridges. International Dentistry South Africa, 9(4), 74-78.
Conference Contribution - Poster Presentation (not in published proceedings)
Jansen van Vuuren, W., Jansen van Vuuren, L., & van Eeden, R. (2007, May). Esthetic and practical method of using glass composite veneering material to fabricate artificial soft tissue on full arch titanium Procera® Implant Bridges. Poster session presented at the Nobel Biocare World Conference, Las Vegas, USA.
